| Fashion model | Scania DC13 |
| Regulatory Compliance | Stage IV |
| Amount of cilinders | 6 |
| Rated Gross Power at 1800 rpm (SAE J1995) | 257 kW (345 hp) |
| Maximum gross torque at 1400 rpm | 1600 Nm |
| Idle (low - automatic - high) | 750 - 950 - 2200 [±20] rpm |
| Displacement | 12.7 l |
| Bore x Stroke Length | 130 x 160mm |
| Starter | 24 V / 6 kW |
| Batteries, alternator | 2 x 12 V / 200 Ah - 28 V / 100 Ah |
| Air filter | Turbo III pre-filter according to cyclone principle with two-stage Donaldson dry filter |
| Cooling | Cooling package with automatic reversing fan for easy radiator cleaning. Automatic rotation speed adjustment according to temperature conditions |
| Type | ZF 5 WG 260 + lock up |
| torque converter | Simple Phase / Single Phase / Fixed Wheel Stator |
| Gears forward: 1-2-3-4-5 | 6.5 / 12.0 / 19.0 / 26.5 / 37.0 km/h |
| Reverse gears: 1-2-3 | 6.5 / 12.0 / 26.0 km/h |
| Maximum traction | 23,600 kg |
| Maximum climbing ability | 30º / 58% |
| Type | Closed hydraulics with load sensing |
| main pump | Variable displacement double axial piston pump |
| Maximum flow | 476 l/min |
| Maximum pressure | 315 bar |
| Pilot System | Standard automatic functions to position the bucket for digging plus one function to stop the lift arm at the desired height by manually operating the switch |
| Filtration | The glass fiber filter in the oil return line to the tank filters out particles from 10 microns |
| Lift arm - up | 6.3 sec |
| Lift arm down | 3.0 sec |
| Bake - retract | 2.3 s |
| Bake - deposit | 1.6 s |
| braking distance | 9.0 m at 36 km/h |
| Number of brake discs per wheel (front / rear) | 9 / 9 |
| Accumulators | 0.75 l - 30 bar |
| Safety standards | ROPS ISO 3471:2008, FOPS ISO 3449 |
| Door | 1 |
| emergency exits | 2 |
| A-weighted sound pressure level at the operator, LpAd (ISO 6396:2008) | According to specification: 73 dB(A), measured: 72 dB(A) |
| A-weighted sound power level outside the machine, LwAd (ISO 6395) | According to specification: 106 dB(A), measured: 104 dB(A) |
| Fuel tank | 336 l |
| urea tank | 60 l |
| Cooling system | 60 l |
| Engine oil | 38 l |
| front axle | 42 l |
| rear axle | 42 l |
| Hydraulic oil tank | 230 l |
| Transmission oil | 54 l |
| Type | Load sensing with amplification and priority valve |
| Steering angle | 40º |
| Oil flow | 210 l/min |
| operating pressure | 200 bar |
| Control cylinders (2) | Emergency steering system with electric motor-driven hydraulic pump |
| Bore x Rod Diameter x Stroke (mm) | 100 x 50 x 450mm |
| Working (pump cut off) | 315 ± 10 bar |
| Power steering at LS port | 185 ± 5 bar |
| Power steering at steering pump | 200 ± 10 bar |
| Pilot Control | 30 + 2 bar |
| Charging the brake accumulator | 100 ~ 160 bar |
| foot brake | 80 ± 3 bar |
| Motor fan | 150 ± 10 bar |
| Unblocking handbrake | 120 ± 5 bar |
| Press for transmission selection | 17 ± 1 bar |
We have an extremely broad rental fleet in which we rent out our earth-moving machines for any desired project! Whether it concerns a few days or months, or a project that takes longer: we offer a perfect rental solution for your specific question. Did you know that you can also mount overpressure or rent GPS, weighing systems and various equipment from us? In short; we work with the best equipment that perfectly matches your needs.
Vul hieronder je gegevens in en we nemen zo spoedig mogelijk contact met je op. Let op wij verhuren alleen zakelijk dus niet aan particulieren!
Neem contact met ons op. We vertellen je er graag meer over!
Bel +31 413 725 111 Of ga naar onze contactpaginaWe have a product specialist for your region
Neem contact met ons op. We vertellen je er graag meer over!
Bel +31 413 725 111
