| Model | Perkins 1204F |
| No. cylinders | 4 |
| Rated power at 200 rpm (SAE J1995) | 85,9 kW (115 pk) |
| Rated power at 200 rpm (SAE J1349) | 81,6 kW (109 pk) |
| Rated power at 200 rpm (ISO 9249)) | 81,6 kW (110 pk) |
| Max. torque at 1400 rpm | 51 kgf·m |
| Stationary (low - high) | 950 [±10] - 2060 [±25] tpm |
| Cylinder capacity | 4400 cm³ |
| Bore x stroke length | 105 x 127 mm |
| Starter motor | 24 V / 4,5 kW |
| Accu's, dynamo | 2 x 12 V / 100 Ah - 24 V / 85 A |
| Air filter | Two-stage air filter |
| Main pumps (type) | Axiale zuigerpompen met variabel slagvolume |
| Maximum flow at 2000 rpm | 2 x 114 l/min |
| Servo pump (type) | Gear pump |
| Maximum flow at 2000 rpm | 30 l/min |
| Relief valve setting | |
| Push up | 350 kg/cm² |
| Travel | 330 kg/cm² |
| Swing | 275 kg/cm² |
| Pilot | 40 kg/cm² |
| One-piece boom | 110 x 75 x 1103 mm |
| Arm | 115 x 80 x 1108 mm |
| Bucket | 100 x 70 x 900 mm |
| Two-piece boom below | 110 x 75 x 965 mm |
| Two-piece boom above | 140 x 85 x 720 mm |
| Arm, two-piece boom | 115 x 80 x 1068 mm |
| Maximum slew speed | 9,9 rpm |
| Maximum swing torque | 4800 kgf·m |
| Drivingspeed (low-high) | 2,8 / 4,7 km/h |
| Maximum traction | 16.400 kg |
| Maximum climbing ability | 35º / 70% |
| Fuel tank | 210 l |
| Cooling system | 25 l |
| Hydraulic oil tank | 130 l |
| Motor oil | 8 l |
| Swing drive | 3 l |
| Driving facility | 2 x 2 l |
| Ureumtank | 19 l |
| Superstructure without front construction | 7.940 kg |
| Substructure | 5.040 kg |
| Front construction | 2.380 kg |
| Counterweight | 3.400 kg |
| Boom (4600 mm) | 767 kg |
| Two piece boom above (3350 mm) | 592 kg |
| Two piece boom below (2000 mm) | 384 kg |
| Arm (2100 mm) | 370 kg |
| Arm (2500 mm) | 414 kg |
| Arm (3000 mm) | 465 kg |
| A-weighted sound pressure level at the driver, LpAd (ISO 6396: 2008) | 73 dB(A) |
| A-weighted sound power level at the driver, LWAd (2000/14 / EC) | According to specification: 100 dB (A), measured: 98 dB (A) |
Robert, Pieter, Johan and Sijmen know every detail of the machines. They love to tell you more about it.
When a breakdown or maintenance needs to be done to your excavator, it is important that this is done by a professional. That is why we train our technicians by having them follow training courses at Doosan and learning from each other internally. We stand for optimally performing machines that help you to be successful. We can only achieve this when we have the best people on the road and location. We therefore guarantee that we are always ready for our customers and always offer a solution.
Enter your details below and we will contact you as soon as possible. So that we can go through your machine with one of the sales specialists.
Enter your details below and we will contact you as soon as possible. So that we can go through your machine with one of the sales specialists.
Please contact us. We love to tell you more about it!
Call +31 413 725 111 Or visit our contactpageWe have a product specialist for your region
Please contact us. We love to tell you more about it!
Call +31 413 725 111
