The drive of the Doosan DL280-7 wheel loader has four gears. This provides extra acceleration and increased performance, especially on slopes. In addition, the new design and cabin contribute to an even higher comfort for the operator.
| Fashion model | Doosan DL06 |
| Regulatory Compliance | Stage IV |
| Amount of cilinders | 6 |
| Rated Gross Power at 1800 rpm (SAE J1995) | 128 kW (174 hp) |
| Maximum gross torque at 1400 rpm | 840 Nm |
| Stationary (low - high) | 800 - 2100 rpm |
| Displacement | 5.9 l |
| Bore x Stroke Length | 100 x 125mm |
| starter motor | 24 V / 6 kW |
| Batteries, alternator | 2 x 12 V / 100 Ah - 24 V / 80 A |
| Air filter | Centrifugal Pre-Filter Top Spin™ Donaldson® with Two Stage Drying Filter |
| Cooling | Cooling package with automatic reversing fan for easy radiator cleaning. Automatic rotation speed adjustment according to temperature conditions |
| Type | 4-speed PowerShift automatic |
| Gears forward: 1-2-3-4 | 6.3 / 12.4 / 23.1 / 35.5 km/h |
| Reverse gears: 1-2-3 | 6.6 / 13.1 / 24.2 km/h |
| Maximum traction | 12,000 kg |
| Maximum climbing ability | 38º / 58% |
| LSD barrier ratio | 30% (front and rear) |
| HDL lock ratio | 100% (front) |
| pendulum angle | ±12º |
| Tire size, standard | 20.5R25 (L3) |
| Type | Closed hydraulics with load sensing |
| main pump | Variable displacement axial piston pump |
| Maximum flow | 210 l/min |
| Maximum pressure | 265 bar |
| Pilot System | Standard automatic functions to position the bucket for digging plus a function to stop the lift arm at the desired height by operating the switch manually |
| Filtration | The glass fiber filter in the oil return line to the tank filters out particles from 10 microns |
| Lift arm - up | 6.3 sec |
| Lift Arm - Down | 3.2 sec |
| Bake - retract | 2.1 sec |
| Bake - deposit | 1.3 s |
| braking distance | 8.4 m at 33 km/h |
| Number of brake discs per wheel (front/rear) | 16 / 14 |
| Accumulators | 0.75 l - 30 bar |
| Safety standards | ROPS ISO 3471:2008, ROPS ISO 3449 |
| Door | 1 |
| emergency exits | 2 |
| A-weighted sound pressure level at the operator (ISO 6396) | According to specification: 72 dB(A), measured: 71 dB(A) |
| A-weighted sound power level outside the machine (ISO 6396) | According to specification: 103 dB(A), measured: 101 dB(A) |
| Fuel tank | 235 l |
| urea tank | 32 l |
| Cooling system | 32 l |
| Engine oil | 24.5 l |
| front axle | 35 l |
| rear axle | 35 l |
| Hydraulic System | 120 l |
| Transmission oil | 37 l |
| Type | Load sensing with amplification and priority valve |
| Steering angle | 40º |
| Oil flow | 210 l/min |
| operating pressure | 195 bar |
| Control cylinders (2) | Emergency steering system with electric motor-driven hydraulic pump |
| Bore x Rod Diameter x Stroke (mm) | 70 x 45 x 425mm |
| Working (pump cut off) | 265 ± 5 bar |
| Power steering - at LS port | 175 ± 10 bar |
| Power steering - at steering pump | 195 ± 10 bar |
| Pilot Control | 32 ± 2 bar |
| Charging the brake accumulator | 100 - 160 bar |
| service brake | 60 ± 3 bar |
| Motor fan | 160 ± 10 bar |
| Unblocking handbrake | 120 ± 5 bar |
| Press for transmission selection | 16 ± 1 bar |
Roderique, Sjoerd, Pieter, Johan and Sijmen would like to meet you and discuss the possibilities with you.
When a malfunction or maintenance has to be done on your Doosan excavator, it is important that this is done by a professional. That is why our mechanics are given the opportunity to follow training courses at Doosan. In this way they also learn from each other internally and we keep everyone sharp and up to date with regard to the latest technical developments in the profession. We stand for optimally performing machines that help you to be successful. We can only achieve this when we have the best people on the road and on location to keep your earth-moving machines running optimally. We therefore guarantee that we are always there for you and come up with a solution.
Vul hieronder je gegevens in en we nemen zo spoedig mogelijk contact met je op. Zodat we jouw machine samen met een van de verkoopspecialisten kunnen doornemen.
Vul hieronder je gegevens in en we nemen zo spoedig mogelijk contact met je op. Zodat we jouw machine samen met een van de verkoopspecialisten kunnen doornemen.
Neem contact met ons op. We vertellen je er graag meer over!
Bel +31 413 725 111 Of ga naar onze contactpaginaWe have a product specialist for your region
Neem contact met ons op. We vertellen je er graag meer over!
Bel +31 413 725 111
